Rear Brake; Brake Lining Inspection; Rear Brake Disassembly - KYMCO GRAND DINK 50 Service Manual

14
. REAR WHEEL/REAR BRAKE/REAR
GRAND DINK 50
SHOCK ABSORBER

REAR BRAKE

Remove the rear wheel. ( Ö 14-3)
Inspect the rear brake drum.
Measure the rear brake drum I.D.
Service Limit: 95.5mm replace if over

BRAKE LINING INSPECTION

Measure the brake lining thickness.
Service Limit: 2.0mm replace if below
Keep oil or grease off the brake linings.

REAR BRAKE DISASSEMBLY

Brake Arm
Brake Shoes
Remove the rear brake adjusting nut and
disconnect the rear brake cable.
Remove the rear brake shoes.
Adjusting Nut
14-4