Engine Removal - KYMCO GRAND DINK 50 Service Manual

5
. ENGINE REMOVAL/INSTALLATION

ENGINE REMOVAL

Remove the frame body cover. ( Ö 12-5)
Remove the two bolts attaching the air
cleaner case.
Loosen the band between the air cleaner
and carburetor to remove the air cleaner
case.
Remove the carburetor cap.
Disconnect the auto bystarter, A.C.
generator and starter motor wire
connectors.
Disconnect the oil pump control cable from
the pump body.
Disconnect the oil inlet line from the oil
pump.
Remove the spark plug cap.
After the oil inlet line is disconnected,
plug the oil line opening to prevent oil
from flowing out.
Carburetor Cap
Band
AC Generator Wire Connector
Oil Pump Control Cable
Oil Inlet Line
GRAND DINK 50
Air Cleaner Case
Bolt
Spark Plug Cap
5-2