Ignition Switch Inspection; Ignition Switch Replacement; Switches - KYMCO GRAND DINK 50 Service Manual

16
. INSTRUMENT/SWITCHES/LIGHTS
Move the oil meter float up and down to see
if the oil indicator light will go out and come
on.
If the oil indicator light does not light,
check for burned bulb, loose wire or
connector. After correction, check again
according to the method mentioned
above.

SWITCHES

IGNITION SWITCH INSPECTION

Remove the front cover. ( Ö 12-3)
Disconnect the ignition switch wire couplers
and check for continuity between the wire
terminals.
Color Red Black/White Green Black
Symbol BAT1
LOCK
OFF
ON

IGNITION SWITCH REPLACEMENT

Remove the front cover. ( Ö 12-3)
Disconnect the ignition switch wire
couplers.
Remove the two mounting bolts and
remove the ignition switch.
The installation sequence is the reverse of
removal.
IG E BAT2
Oil Indicator Light
Ignition Switch Coupler
Ignition Switch Holder
GRAND DINK 50
Seat Wire
Tank Wire
16-4