Engine Hanger Bracket Removal - KYMCO GRAND DINK 50 Service Manual

5
. ENGINE REMOVAL/INSTALLATION
Remove the rear brake adjusting nut and
disconnect the brake cable from the
crankcase.
Remove the rear brake cable clamp and
rear brake cable.
Remove the cooling air tube band on the
left crankcase cover and disconnect the
cooling air tube.
Remove the rear shock absorber lower
mount bolt.
Remove the right and left engine mounting
nuts.
Take out the right and left engine mounting
bolts.
Lift the frame upward to separate it from
the engine and be careful not to
damage the rear fender.

ENGINE HANGER BRACKET REMOVAL

Remove the engine hanger bracket bolt and
engine hanger bracket.
The installation sequence is the reserve of
removal.
Torque: 3.5 4.5kg-m
5-3
Rear Shock Absorber Lower Mount Bolt
Air tube
Engine Mounting Nuts
Engine Hanger
Engine Hanger Bracket Bolt
GRAND DINK 50
Rear Brake Cable