Section 2-Controls & Features; Ignition Switch - KYMCO PEOPLE S 50 Manual

SECTION 2 - CONTROLS&FEATURES

IGNITION SWITCH

To operate the ignition switch and its functions:
" " Position:
All electrical circuits are off. The engine can't run
or be started .
" " Position:
The ignition circuit is "ON" and engine can now be
started. The key can not be removed from the
ignition switch in this position.
" " Position:
To lock the steering, turn the handlebar all the way
to the left, push down and turn the key to the "
position and remove the key. All electrical circuits
are off.
" " Position:
With the ignition key in the "
engine is running), push the key in and turn it
counterclockwise from "
position.
8
"
" position (the
" to the " "
With the ignition key in the "
(the engine is not running), turn the
counterclockwise from the "
" " position.
With the ignition key in the "
turn the key counterclockwise from "
to " "position.Pull up on the back
portion of the seat to lift it up.
" position
" to the
"position,
"