Key & Ignition Switch - KYMCO DOWNTOWN 300i 2011 Owner's Manual

KEYS & IGNITION SWITCH
Keys
Your Downtown 300i scooter is supplied with two identical ignition
switch keys. The ignition key operates the ignition switch, and the
steering lock, and is used to open the seat to gain access to the
under-seat storage compartment.
NOTE: The keys have a unique code stamped on the tab
supplied with the keys. This code is not stamped on the
scooter or recorded in the vehicle's basic documentation (for
security reasons). Since this code is required to obtain
replacement keys, record this important code in the box
provided near the front of this Owner's Manual.
Ignition Switch
To operate the ignition switch and its functions:
OFF Position : All electrical circuits are off. The engine will
not start or run.
ON Position : The ignition circuit is "ON" and engine can now
be started. The key cannot be removed from the ignition switch in
this position.
LOCK Position : To lock the steering, turn the handlebar all
the way to the left, push in and turn the key to the LOCK position and
remove the key. All electrical circuits are off.
15