Dynamic Range Control (Drc) - Dab - Roberts Blutune User Manual

Dynamic Range Control (DRC) - DAB

The DRC facility can make quieter sounds easier to hear when your radio
is used in a noisy environment.
There are three levels of compression:
DRC 0 No compression applied. (default)
DRC 1/2 Medium compression applied.
DRC 1 Maximum compression applied.
1. Press and release the On/Standby button to switch on your radio.
2. Repeatedly, press and hold the Source button until the DAB mode is
selected.
3. Press and release the Menu button. The DAB menu will show on the
display.
4. Press and release the Tuning Up or Down buttons until 'DRC' appears
on the display. Press and release the Select control. The display will
show the current DRC value and it will be marked with an asterisk.
5. Press and release the Tuning Up or Down buttons to select the
required DRC setting (default is 0).
6. Press and release the Select button to confi rm the setting. After several
seconds the display will return to the normal radio display.
Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio will
have no effect.
13
1
<DRC
2,3
<DRC 0
4,5
4,5
<DRC 1
4,6
<DRC 1/2
DAB
DAB
>
DRC *
>
DRC
>
DRC
>