Dynamic Range Control (Drc) Settings - Dab - Roberts solarDAB 2 Manual

Dynamic Range Control settings - DAB
Dynamic Range Control (also known as DRC) can make quieter sounds
easier to hear when your radio is used in a noisy environment.
1. Press the On/Off button to switch on your radio.
2. Press and hold the Info button until the Advanced DAB menu shows
on the display and then release the button.
3. Rotate the Tuning control until the display shows 'DRC'.
4. Press and release the Tuning control to enter the adjustment mode.
5. Rotate the Tuning control to select the required DRC setting (the
default is 0). The current DRC setting will be marked with an asterisk.
DRC 0 - DRC is switched off, Broadcast DRC will be ignored.
DRC 1/2 - DRC level is set to 1/2 that sent by broadcaster.
DRC 1 - DRC level is used as sent by broadcaster.
6. Press and release the Tuning control to confi rm the setting. The
display will return to normal tuning mode.
Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio will
have no effect.
13
DRC
1
DRC 0
2
DRC 1/2
3-6
DRC 1
DAB
DRC *
DRC
DRC