Table of Contents
Advertisement
Dynamic Range Control settings - DAB
Dynamic Range Control (also known as DRC) can
make quieter sounds easier to hear when your radio
is used in a noisy environment.
1.
Press the On/Off button to switch on your
radio.
2.
Press and hold in the Jog wheel. The display will
show "Find Services."
3.
Push the Jog wheel up or down until the display
shows "Settings". Click the Jog wheel to enter
the settings menu.
4.
Push the Jog wheel up or down untill "DRC" is
highlighted.
5.
Click the Jog wheel to enter the adjustment
mode.
6.
Push the Jog wheel up or down to select the
required DRC setting (the default is 0).
DRC 0 - DRC is switched off, Broadcast DRC will be
ignored. DRC 1/2 - DRC level is set to 1/2 that sent
by broadcaster. DRC 1 - DRC level is used as sent
by broadcaster.
7.
Click the Jog wheel to confi rm the setting. The
display will return to the previous display.
31
1
2-7
Note: Not all DAB
broadcasts are able to
use the DRC function.
If the broadcast does
not support DRC, then
the DRC setting in
the radio will have no
effect.
If you need any further advice, please call our Technical
Helpline on :- 020 8758 0338 (Mon-Fri)
32
Hide quick links:
Advertisement
Table of Contents
