Setting The Clock Manually - Roberts Blutune User Manual

Setting the clock manually

Normally your radio will set its clock automatically using the DAB radio
signal. If no DAB signal is available and you need to set the time manually,
please follow the procedure shown below.
1. Press and release the On/Standby button to switch on the radio.
2. To set the clock time, press and release the Menu button. The menu
will show on the display.
3. Press and release the Tuning Up or Down buttons until 'System'
appears on the display. Press and release the Select button.
4. Press and release the Tuning Up or Down buttons until 'Time' appears
on the display. Press and release the Select button.
5. Press and release the Tuning Up or Down buttons until 'Set Time/
Date' appears on the display.
6. Press and release the Select button to enter the manual setting
procedure. The hour digits will then fl ash on the display.
7. Press and release the Tuning Up or Down buttons to set the desired
hour.
8. Press and release the Select button to enter the hour setting.
9. The minute digits will then fl ash on the display. Press and release the
Tuning Up or Down buttons to set the desired minute.
33
<System
1
<Time
2
<Set Time/Date >
3-9
3-9
3-8
DAB
>
System
>
Time
Set time
9:00
Set time
9:00