Automatically Updating The Clock - Roberts Blutune User Manual

Automatically updating the clock

Your radio will usually set the clock time using the DAB signal. You may
specify that the radio sets its clock from the DAB or FM waveband, either
waveband or none. If you choose none you will need to set the clock manually.
1. Press and release the On/Standby button to switch on the radio.
2. Press and release the Menu button. The menu will show on the display.
3. Press and release the Tuning Up or Down buttons until 'System'
appears on the display. Press and release the Select button.
4. Press and release the Tuning Up or Down buttons until 'Time' appears
on the display. Press and release the Select button.
5. Press and release the Tuning Up or Down buttons until 'Auto update'
appears on the display. Press and release the Select button. The
current setting will be marked with an asterisk.
6. Press and release the Tuning Up or Down buttons to choose an
update option from, 'Any, DAB, FM or No update.
7. Press and release the Select button to confi rm your choice.
8. The radio will set its time according to the information received. The
radio will return to the previous menu display.
If a signal is not found you should then either position the radio or its
aerial so that a signal can be received, or revert to manual clock mode
(see page 33).
35
<System
1
<Time
2
<Auto update
3-6
3-6
Auto update
<Update from DA>
3-7
Auto update
<Update from An>
DAB
>
System
>
Time
>
*