Auxiliary Input Socket - Roberts Blutune User Manual

Auxiliary input socket

1. Connect a stereo or mono audio source (i.e. CD player, MP3 player,
etc.) to the Auxiliary input socket.
2. Press and release the On/Standby button to switch on the radio.
3. Repeatedly press and hold the Source button until the display shows
'Aux in'.
4. Adjust the Volume control on your player and on the radio for comfortable
listening.
5. Remove the cable from the Auxiliary input socket or press and hold
the Source button to cancel Auxiliary Input mode.
Note: If the radio is in Auxiliary input mode with no input signal being
applied for more than 15 minutes then it will automatically switch to the
standby mode. The LCD will revert to the standby mode clock display. To
use the radio again, simply press the On/Standby button to switch it on.
41
Aux-in
10:00
2
3
1