Dynamic Range Control (Drc) - Dab - Roberts eco 4 Bt User Manual

Dynamic Range Control (DRC) - DAB

The DRC facility can make quieter sounds easier to hear when your radio
is used in a noisy environment.
There are three levels of compression:
DRC 0 No compression applied. (default)
DRC 1/2 Medium compression applied.
DRC 1 Maximum compression applied.
1. Press and release the On/Off button to switch on your radio.
2. Press and release the Mode button until the DAB mode is selected.
3. Press and hold the Info/Menu button. The DAB menu will show on
the display.
4. Rotate the Tuning control or press and release the Tuning Up or
Down buttons until 'DRC' appears on the display. Press and release
the Select button. The display will show the current DRC value.
5. Rotate the Tuning control or press and release the Tuning Up or
Down buttons to select the required DRC setting (default is 0).
6. Press and release the Select button to confi rm the setting. After several
seconds the display will return to the normal radio display.
Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio will
have no effect.
Mode
2
3
4,5
4,5
4,5
4,6
12