Dynamic Range Control (Drc) - Dab - Roberts classic blutune User Manual

Dynamic Range Control (DRC) - DAB

The DRC facility can make quieter sounds easier to hear when your radio
is used in a noisy environment.
There are three levels of compression:
DRC 0 No compression applied. (default)
DRC 1/2 Medium compression applied.
DRC 1 Maximum compression applied.
1. Press and release the On/Off button to switch on your radio.
2. Press and release the Mode button until the DAB mode is selected.
3. Press and hold the Menu button. The DAB menu will show on the
display.
4. Rotate the Tuning control until 'DRC' appears on the display. Press
and release the Tuning control. The display will show the current DRC
value.
5. Rotate the Tuning control to select the required DRC setting
(default is 0).
6. Press and release the Tuning control to confi rm the setting. After
several seconds the display will return to the normal radio display.
Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio will
have no effect.
2
3
4-6
12