Using The Radio For The Fi Rst Time - Roberts Blutune User Manual

Using the radio for the fi rst time
1. Place your radio on a fl at surface.
2. Fully extend the telescopic aerial. The aerial should be fully extended
and positioned vertically for optimum reception.
3. Plug the mains lead into the mains socket located on the back of your
radio ensuring that the plug is pushed fully into the socket.
4. Plug the other end of the mains lead into the wall socket and switch
on the wall socket. The display will show 'Roberts Enjoy Listening' for
a few seconds. During this time the radio is scanning to fi nd a DAB
radio signal. After a short time the current time and day will appear
on the display.
5. If no signal is found, '0:00' will be displayed. It may be necessary to
relocate your radio to a position giving better reception. You should
then carry out a scan to fi nd stations as described on page 11.
IMPORTANT: The mains plug is used as the means of connecting the
radio to the mains supply. The mains socket used for the radio must remain
accessible during normal use. In order to disconnect the radio from the
mains completely, the mains plug should be removed from the mains
socket outlet completely.
Characters appearing on the LCD display indicate that the radio is connected
to and powered from the mains supply.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Roberts
Enjoy Listening
09:30 WE
6