Connecting Bluetooth Devices - Roberts Blutune User Manual

Connecting Bluetooth devices

1. Ensure that the Bluetooth capability on your phone, tablet or PC is
enabled. You may need to refer to the user documentation for your
device, since the method will vary with each device.
2. Press and release the On/Standby button to switch on the radio.
3. Repeatedly, press and hold the Source button on your radio until the
Bluetooth mode is selected. Your radio will show that it is 'discoverable'
by fl ashing the Bluetooth indicator on the display.
4. Using the Bluetooth settings of your phone, tablet or PC direct it to
search for 'discoverable' devices. After a few seconds, you should see
a device named 'Blutune'.
5. Select 'Blutune' to cause your phone, tablet or PC to pair with your
radio and to establish a connection.
6. Once the connection is established, the Bluetooth indicator on the
radio display will remain lit. You can now begin playing music from
your phone etc.
Some Bluetooth devices may require a 'Passkey' (an authentication key) in
order to establish a link between devices. A passkey is similar to a password,
although you only need to use the passkey once to establish a link. If your
device asks for a passkey to be able to pair with your radio then enter a code
of 0000 (four zeroes).
23
Bluetooth
09:30
2
Bluetooth
09:30
3