Sleep Function - Roberts Blutune User Manual

Sleep function

Your radio can be set to turn off after a preset time has elapsed. The sleep
setting can be adjusted between 15 and 90 minutes in increments. Ensure
your radio is switched on.
1. When using your radio, press and hold the On/Standby button and
then release the button. 'Set sleep time' will show on the display.
2. Press and release the Tuning Up or Down buttons to select the
desired sleep time. The sleep setting will increase in increments from
15 minutes up to 90 minutes. A further increment will cause the sleep
timer to be set to Off which will cancel the sleep function.
3. Press and release the Select button. The display will exit the sleep
options.
4. Your radio will switch off after the preset sleep time has elapsed.
5. To view the remaining sleep time, press and hold the On/Standby
button and then release the button. The remaining sleep time will show
on the display.
To change the current sleep time duration you may select a different
setting using steps 2 and 3 above.
6. To cancel the sleep timer and switch off your radio before the chosen
sleep time has elapsed, press and release the On/Standby button.
To cancel the sleep timer without switching off your radio, set the sleep
timer to the Off setting using steps 1, 2 and 3 above.
31
Set sleep time
1
Set sleep time
2
2
Set sleep time
3
Set sleep time
5,6
30 minutes
45 minutes
Sleep off
29 minutes