Dynamic Range Control (Drc) - Dab - Roberts User Manual

Dynamic Range Control (DRC) - DAB

Dynamic range control (also known as DRC) can make quieter sounds
easier to hear when your radio is used in a noisy environment.
There are three levels of compression:
DRC 0 No compression applied. (default)
DRC 1 Maximum compression applied.
DRC 1/2 Medium compression applied.
1. Press the On / Standby button to switch on your radio.
2. Press and release the Mode button until the DAB band is selected.
3. Press and release the Menu button.
4. Press the Tuning Up or Down buttons until 'DRC' appears on the
display. Then press and release the Select button. The display will
show the current DRC value and it will be marked with an asterisk.
5. Press the Tuning Up or Down buttons to select the required DRC setting
(default is 0) .
6. Press and release the Select button to confi rm the setting. The display
will return to the previous display.
Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio will
have no effect.
15
2
3
4,5
4,5
4,6