Stereo / Mono Setting - Fm - Roberts Blutune User Manual

Stereo / Mono setting - FM

Your radio will play stereo FM broadcasts in stereo provided that the
received signal is of adequate strength. However, as a stereo signal
becomes weaker the audio signal will become poorer. It may be preferable
to force the radio to play the station in mono in order to reduce the level
of background hiss.
1. Press and release the On/Standby button to switch on your radio.
2. Repeatedly press and hold the Source button until the FM mode is
selected.
3. Press and release the Menu button. The FM menu will show on the
display.
4. Press and release the Tuning Up or Down buttons until 'Audio setting'
shows on the display. Press and release the Select button. The current
setting will be marked with an asterisk.
5. To switch to mono to reduce the hiss from a weak FM signal, press and
release the Tuning Up or Down buttons until 'Forced Mono' appears
on the display. Press and release the Select button to confi rm the
setting.
6. If you wish to return to the normal automatic 'stereo or mono' while
listening to the currently tuned radio station follow steps 1 to 4 above.
Press and release the Tuning Up or Down buttons until 'Stereo
Allowed' shows on the display. Press and release the Select button
to confi rm the setting. The radio will play the current station in stereo
if the signal is suffi ciently strong.
19
1
<Audio setting >
2,3
Audio setting
<Forced mono
4-6
4-6
Audio setting
<Stereo allowed >
4-6
FM
FM
>
*