Presetting Stations - Roberts Blutune User Manual

Dab / dab+ / fm / bluetooth stereo digital radio
Table of Contents

Advertisement

Presetting stations

You may store your preferred DAB and FM radio stations to the preset
station memories. There are 20 memory presets in your radio, 10 for
DAB and 10 for FM. Presets are remembered by your radio in the event
of a power failure.
The procedure for setting presets and using them to tune stations is the
same for FM and DAB modes, and is described below.
1. Press and release the On/Standby button to switch on the radio.
2. Repeatedly, press and hold the Source button to select either the FM
or DAB mode.
3. Tune to the required station as previously described.
4. Press and hold the Select button. The display will show, for example,
'PO1 (Empty)' if no station has been stored to that preset.
5. Press and release the Tuning Up or Down buttons to select the desired
preset station number under which you wish to store the station.
6. Press and hold the Select button until the display shows, for example,
'Preset 1 stored'. The station will be stored under the chosen preset.
Repeat this procedure for the remaining presets.
7. Stations which have been stored in preset memories may be overwritten
by following the above procedure.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
BBC Radio 4
The latest news
1
Preset
<P01 (Empty)
2
Preset 1
stored
4,6
5
5
>
20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents