Do you have a question about the Stream 94L and is the answer not in the manual?
Questions and answers
Peter Stirling
February 15, 2025
I have a Roberts Stream 94L radio The clock has stopped working despite resetting and switching the power off
1 comments:
Mr. Anderson
February 15, 2025
The provided context does not contain specific instructions for fixing the clock on the Roberts Stream 94L radio. However, you may try the following general troubleshooting steps:
1. Check Power Source – Ensure the radio is properly powered. 2. Restart the Radio – Turn it off and on again. 3. Set the Clock Manually – If the clock is incorrect, navigate to the settings menu and adjust the time. 4. Check Network Connection – If using internet time synchronization, ensure the radio is connected to WiFi. 5. Factory Reset – If issues persist, perform a reset from the settings menu.
If the issue continues, refer to the user manual or customer support.
This answer is automatically generated
bill forrest
February 2, 2025
does the 94l use internal batteries?
1 comments:
Mr. Anderson
February 10, 2025
No, the Roberts Stream 94L is mains powered but can use an optional battery pack for portability. It does not have internal batteries.
This answer is automatically generated
P.Emmel
January 23, 2025
The radio is connected to router. Choose internet radio station but the menu to select stations does not come up what do I do
1 comments:
Mr. Anderson
February 10, 2025
If the station selection menu does not appear on the Roberts Stream 94L radio when connected to the router, follow these steps:
1. Check WiFi Connection: Ensure the radio is connected to the correct WiFi network. Rotate the Tuning control to see available SSIDs and select the correct one.
2. Manual Network Configuration: If your network SSID is hidden, select '[Manual config]' and enter the network details manually.
3. Verify Internet Connection: Ensure the router has an active internet connection. Restart the router if needed.
4. Rescan for Stations: Try rescanning for internet radio stations by accessing the 'Station List' from the menu.
5. Check Troubleshooting Section: The issue may be covered in the 'Troubleshooting' section on page 54 of the manual.
6. Restart the Radio: Turn the radio off and on again to refresh the connection.
If the issue persists, consider resetting the radio to factory settings and setting up the connection again.
This answer is automatically generated
Richard Dimmich
May 10, 2025
Hi, I have the Roberts Radio 94L and would like to use it in my outside - is it possible to buy a battery or accumulator (rechargeable) to be independent from the mains??? If yes, can you recommend some products?
P Emmel
January 23, 2025
The radio is connected to router. Choose internet radio station but the menu to select stations does not come up
1 comments:
Mr. Anderson
February 10, 2025
The station selection menu may not appear on the Roberts Stream 94L radio if the device is not properly connected to the internet. Possible reasons include:
1. Incorrect or Weak WiFi Connection – The radio may not be connected to the correct wireless network or may have a weak signal. 2. SSID Not Broadcasted – If the router is set to hide the SSID, the radio may not detect the network automatically. In this case, manual configuration is required. 3. Incorrect Network Configuration – If the network settings were not set up correctly, the radio may not have internet access. 4. Temporary Connection Issue – Some Android devices may temporarily lose internet connectivity while setting up the radio, but this can be ignored.
Checking the network settings and ensuring a proper connection should resolve the issue.
Dab/fm/wifi radio with internet radio, music player and spotify connect (108 pages)
Summary of Contents for Roberts Stream 94L
Page 1
Stream 94L Smart Radio with Bluetooth, USB and Streaming Services and remote control from iPhone and Android using UNDOK Please read this guide before use...
Contents Clock and Alarms Stream 94L Smart Radio features Automatically updating the clock Before you can use this product Setting the clock format About this instruction manual Manually setting the clock Controls and connections Setting the alarm clock Remote control battery replacement...
Stream 94L Smart Radio features The Roberts Stream 94L Smart Radio is a radio which provides the following ● Supports remote control and plays music from Apple iPhone, iPad and Android devices using the UNDOK app. features in an attractive compact unit:- ●...
Before you can use this product Before you can use your radio, you must have the following: ● A broadband Internet connection (not required for DAB, FM or Music Player functions). ● A router (or equivalent wireless access point) providing a WiFi signal, connected to your broadband Internet Service Provider.
This instruction manual is split into sections for each of the operating modes of your Roberts Stream 94L internet radio. Each section is clearly identified by the shaded heading in the top right hand corner of each pair of pages.
Controls and connections Front view 1. Back button 7. Preset 3 / Stop button 13. Volume control 8. Preset 2 / Fast-forward button 14. Remote control sensor 2. Menu button 9. Preset 1 / Rewind button 15. Display panel 3. Mode button 10.
Page 7
Volume Stream 94L DC In: 2.5A USB: 500mA Select/Snooze Roberts Radio Ltd, Stoney Lane, Whiston, Prescot, L35 2XW, UK Glen Dimplex Europe Ltd, READ Airport Road, Cloghran, SAFETY GUIDE Co. Dublin, K67 VE08,Ireland Designed & Engineered in the UK, Made in China DC 12V 2.5A...
Remote control battery replacement 1. Use a tool such as a coin to remove the battery cover on the rear of your remote control. Rotate the cover approximately 45 degrees in an anti-clockwise direction to align the dot on the cover with the ' ' marking on the remote control.
Introduction Navigation controls This page describes the basic means of controlling your Stream 94L radio. Instructions for each operating mode are given in the later sections of this book. 1. Pressing the On/Standby button brings your radio out of Standby mode. Pressing On/ Standby while the radio is in use will cause it to return to the Standby mode with the clock display.
Stream 94L DC In: 2.5A USB: 500mA Roberts Radio Ltd, Stoney Lane, Whiston, Prescot, L35 2XW, UK 2. Plug the mains adaptor into a wall socket and switch on the socket. Glen Dimplex Europe Ltd, READ Airport Road, Cloghran, SAFETY GUIDE Co.
Configuration Clock and time settings The following instructions assume that you have just plugged in your radio Date/Time and you have just specified the language option for the menus (see page 9). 12/24 hour format 1. Rotate Tuning to highlight the desired clock format (either 12 or 24 hour) then press the control to enter your selection.
Connecting to your computer network Before you can use your Stream 94L radio to listen to Internet radio, it must first be connected to your computer Network Settings network. This section of this book describes how to connect the radio to your network using the wireless (WiFi) connection.
Page 13
Configuration Connecting to your computer network - cont. Network Settings 3. To use a WiFi connection, you will first need to identify your network in the list of network names presented by the Network Wizard. If no networks are found then you Network Wizard may have to get your wireless router working (please see the instructions supplied Scanning...
Page 14
Connecting to your computer network - cont. SSID 5. If your network is not found, it may be because the router is configured not to broadcast the SSID. You Jones family should then use the Tuning control to highlight and select the '[Manual config]' option in order to enter [WPS] Paul’s network Smith the network details manually.
Page 15
Configuration Connecting to your computer network - cont. WEP keys are 10 or 26 characters long (using 0 - 9, and A - F). Some wireless routers Key: can also use pass-phrases for WEP but these are not supported by the radio. WPA 123-jones keys are usually set up using a pass-phrase of between 8 and 63 characters.
Page 16
Connecting to your computer network - cont. If you have followed the steps on the preceding pages successfully, your radio will have connected to your Internet Radio router, and then made a connection to the Internet and set its clock. You can then listen to radio stations Last Listened Station List via the internet and use the other features of your radio...
Configuration Manual network configuration If you do not wish to use DHCP for automatic network configuration, or if your network is configured with a Network Settings Network Wizard hidden SSID, then you will need to enter some network settings manually. The typical user will not need to PBC Wlan Setup use manual network configuration.
It is possible that this app may have been changed slightly since these instructions were written. • Please refer to the Roberts Radio website for guidance on how to use the latest version. Note: At the time of writing Android version 4.0.3 and later or iOS version 9 or later are required to use UNDOK.
Page 19
Configuration Setup new audio system - Apple iOS device If your device uses Android, please see page 19. The UNDOK app has a setup wizard to help configure suitable audio devices to connect to your home WiFi network. 1. Open the UNDOK 3.
Page 20
4. Your radio will normally appear in this list as 8. Your radio will connect to Stream 94L. It may your network. appear in the list below called Other. Select the radio to be setup. Note:If when setting up your radio your Android device complains that it cannot connect to the internet this is because it is temporarily connected directly to your radio.
Configuration Network remote control options Network PIN setup (PIN number) Your radio has the option of being controlled by an application installed on an Network Settings Apple iPhone, iPod touch, iPad or equivalent Android device. The PIN number Network Wizard facility allows you to ensure that your radio can only be controlled by your own PBC Wlan Setup View Settings...
This can be helpful if you are unsure of the location or genre of a particular station. The STREAM 94L radio connects to a radio station database which serves many users in many countries. This means that there is a very wide range of programme content available.
Internet Radio Selecting a radio station by location 1. Press On/Standby to switch on the radio. Press Mode until Internet Radio is Internet Radio selected. Last Listened Station List 2. Press Menu. Recall Preset Save Preset 3. Choose 'Station List', 'Location', and then scroll the list of continents then Sleep countries in either direction.
Selecting a popular station Internet Radio Your radio connects via the Internet to a database of radio stations. This option is provided to highlight stations which are particularly popular with listeners around the world. Search Location 1. When in Internet Radio mode press Menu. Popular Discover 2.
Internet Radio Presetting stations Internet radio, DAB and FM Your radio has 40 memory presets for Internet radio/Podcast, 10 DAB and 10 FM which can easily be set to store the details of any radio station. The first five presets may generally be accessed using the memory preset buttons 1 - 5, but these buttons are not available when listening to podcasts since they have other functions.
Page 26
Storing a preset using the menu 1. Switch on your radio and tune to the required Internet Radio/Podcast, DAB or FM station. Save Preset 1. [Not set] 2. BBC Radio 4 2. Apply a long press on the Preset button. The display will show a 'Save 3.
Internet Radio Display options - Radio / Bluetooth / USB Your radio has a range of display options when in Internet Radio / Podcast, DAB, FM, Bluetooth and USB modes:- 1. Press the Info button to cycle through the various options. Internet Radio display options Internet Radio 10:30...
Important: Your radio is only designed to work with USB flash memory devices. It is not intended to be connected to hard disk drives or any other type of USB device. Stream 94L The Stream 94L radio has been tested with a range of USB memory devices of DC In: 2.5A USB: 500mA up to 256GB capacity.
Page 29
USB Playback Playing files from USB memory devices 1. Carefully insert the USB memory device into the USB socket at the back of the radio. Press On/Standby to switch the unit on. USB Playback My Playlist The radio may detect that the memory has been connected, in which case it will ask Repeat Play: Off whether you wish to open the folder view of the memory contents.
Playlists You may wish to set up a list of music tracks or albums which can then be played as background music for a party, for example. Your radio can be configured to hold a queue of up to 500 tracks in a playlist menu.
Page 31
USB Playback Clearing the playlist 1. Press Menu. To clear the whole playlist choose 'Clear My playlist' and USB Playback then choose 'YES'. If you do not wish to clear the playlist choose 'NO'. My Playlist Repeat Play: Off Shuffle Play: Off Clear My Playlist Sleep Playing your playlists...
Page 32
Controlling playback cont. When playing tracks from your USB memory device you may choose to repeat the current album (or playlist), or to play the files in random order, or both options together. USB Playback My Playlist Repeat Play: On Shuffle Play: Off Repeat tracks Clear My Playlist...
DAB Radio DAB Radio 1. Carefully extend the telescopic aerial. Press On/Standby to switch on the radio. If the Scan radio has been used before the last used mode will be selected. Scanning... 2. Press Mode as needed to select the DAB Radio mode. Stations: 57 3.
Finding new DAB radio stations Should you wish to use your radio for DAB reception in a new location, or if no stations Recall Preset were detected during the initial scan, you can follow this procedure to allow your radio to Save Preset Scan find out which DAB radio stations are available.
DAB Radio Dynamic Range Control settings The DRC facillity can make quieter sounds easier to hear when your radio is used in a noisy environment. Recall Preset Save Preset 1. When in DAB mode, press Menu. Scan Manual Tune 2. Choose 'DRC' and then choose the required DRC setting (default is Off). Prune DRC Off - DRC is switched off, Broadcast DRC will be ignored.
FM Radio Operating your radio in FM mode 1. Carefully extend the telescopic aerial and press On/Standby to switch on the radio. 10:30 103.40MHz 2. Press Mode as needed to select the FM Radio mode. 3. Rotate Tuning in a clockwise direction. The displayed frequency will increase.
FM Radio Scan sensitivity setting - FM Your radio will normally scan for FM broadcasts which are strong enough to give good reception. However, you may wish the Auto-scan function to also Recall Preset be able to find weaker signals, possibly from more distant radio transmitters. Save Preset Your radio includes a local / distant option for the Auto-scan function.
The Bluetooth mode on your radio allows you to play audio, play sound from video files and stream music from Bluetooth capable devices such as your mobile phone, computer, tablet etc. through your radio's loudspeakers. ● When a Bluetooth enabled device such as your Stream 94L Radio is in a 'discoverable' state other Bluetooth devices can detect, pair with or connect to it. ●...
Bluetooth indicator will remain steady. You may then play music from the new device through the radio. 4. If you no longer want your Bluetooth device to be paired with your radio you will need to delete the 'Stream 94L' pairing on the device. Please refer to the device's Bluetooth documentation.
Page 40
Disconnecting a Bluetooth device You may disconnect your Bluetooth device using the Bluetooth menu. Bluetooth Disconnect Clear Pairing 1. To disconnect your Bluetooth device, press Menu, then choose 'Disconnect' View Details and then choose 'YES'. Your radio will become 'discoverable' by other devices. Sleep Alarms System Settings...
Bluetooth Bluetooth information Bluetooth connectivity performance may vary depending on the connected The Bluetooth capabilities of your radio enable it to receive audio from many Bluetooth devices. Please refer to the Bluetooth capabilities of your device Bluetooth capable devices including mobile phones, personal computers before connecting to your radio.
Clock and Alarms Automatically updating the clock System Settings Equaliser Your radio will normally update the clock automatically when connected to the internet. Streaming Audio Quality Network Alternatively you may specify that the time is not automatically updated. In this case Time/Date the clock must always be set manually after a power interruption.
Clock and Alarms Manually setting the clock After a connection to the Internet has been established, your radio will normally System Settings set its clock automatically to the local time zone that was specified during Equaliser setup (see page 10). Should you need to set the time manually, change the Streaming Audio Quality Network time zone, or manually switch from winter to summer time (from GMT to BST...
Setting the alarm clock Your radio has two separate alarms which can be set to wake you to either the radio or a buzzer alarm. In the event of a power interruption your radio has built in memory that will retain your alarm settings. Ensure that the time is set correctly before setting the alarms. Alarms may be set while the radio is in standby mode or switched on.
Page 45
Clock and Alarms Setting the alarm clock - cont. 9. Choose the alarm frequency option. Choosing Off will disable the alarm. Alarm 1 date/time If you choose to set the alarm to Once you will also need to set the date. 17 - 01 - 2022 10.
When the alarm sounds cont. 1. During an alarm, the alarm icon will flash on the display. The radio will automatically revert to standby mode after 60 minutes. 2. To cancel an alarm, press On/Standby to return to Standby mode. Note: If the radio is switched on because of an alarm you can control basic functions such as volume and selecting presets.
Clock and Alarms Sleep timer Your radio can be set to turn off after a preset time has elapsed. The sleep timer can be set Set Sleep Time while the radio is in Standby or whilst in use. The sleep timer setting can be adjusted between 15 and 90 minutes.
The sound on your radio can be adjusted to suit your personal taste for the material Streaming Audio Quality that you are listening to. The Stream 94L has a range of equaliser modes. Alternatively Network you may set the treble and bass levels to your own preferences which can be accessed...
We therefore recommend setting DC In: 2.5A USB: 500mA Roberts Radio Ltd, Stoney Lane, Whiston, Prescot, L35 2XW, UK volume to a low level before connecting headphones to the radio. IMPORTANT: Excessive Glen Dimplex Europe Ltd, READ...
Set the volume control on the radio to minimum if desired. Stream 94L DC In: 2.5A USB: 500mA Auxiliary input socket Roberts Radio Ltd, Stoney Lane, Whiston, Prescot, L35 2XW, UK Glen Dimplex Europe Ltd, READ Airport Road, Cloghran, SAFETY GUIDE Co. Dublin, K67 VE08,Ireland Designed &...
Information Information Factory reset System Settings If you wish to completely reset your radio to its initial state this may be performed Network by following this procedure. By performing a factory reset, all user entered settings Time/Date Brightness will be erased. Inactive Standby 1.
Internet connection. You should not attempt to update your Time/Date radio unless it is recommended to you by Roberts Customer Services. Updating the software may remove all Brightness Inactive Standby network settings, radio station presets and alarm settings from your radio.
Page 53
Information Software version display The software version display is provided for reference and customer support purposes. System Settings Inactive Standby 1. Press Menu. Choose 'System Settings' and then 'Info'. The display will show the software Language version and radio ID. Rotate Tuning to display further information. Factory Reset Software Update 2.
Troubleshooting If you experience any trouble with your radio, then you may find it useful You can view the radio’s MAC address using the menu items 'System to visit the help section on our web site. Settings' -> 'Network' -> 'View settings' -> 'MAC address'. The MAC address will typically be of the form If you have difficulty connecting the radio to your computer network, some of these steps may help to resolve the problem:...
Page 55
Information Troubleshooting - cont. If your radio can connect to the network, but is unable to play a particular Try using a computer or phone to listen via the broadcaster’s web site. If Internet radio station, it may be due to one these causes: you can play the station with another device, it may be that the internet feed or local network connection is poor.
Cautions • The AC/DC adaptor and radio shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the AC/DC adaptor or the radio. Do not allow your radio to be exposed to water, steam or sand. •...
Information Software license information Use of the software in this radio is subject to software licence terms contained in this user manual - by using the radio, you are agreeing to comply with these licence terms: Thompson Licensing: MP3 audio decoder MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson Fraunhofer: MPEG-4 HE AAC Audio decoder MPEG-4 HE-AAC audio coding technology licensed by Fraunhofer IIS:...
In the event that it is not possible to return the product to the Roberts dealer from whom it was purchased, please contact Roberts Radio using the contact details on the www.robertsradio.com website.
Need help?
Do you have a question about the Stream 94L and is the answer not in the manual?
Questions and answers
I have a Roberts Stream 94L radio The clock has stopped working despite resetting and switching the power off
The provided context does not contain specific instructions for fixing the clock on the Roberts Stream 94L radio. However, you may try the following general troubleshooting steps:
1. Check Power Source – Ensure the radio is properly powered.
2. Restart the Radio – Turn it off and on again.
3. Set the Clock Manually – If the clock is incorrect, navigate to the settings menu and adjust the time.
4. Check Network Connection – If using internet time synchronization, ensure the radio is connected to WiFi.
5. Factory Reset – If issues persist, perform a reset from the settings menu.
If the issue continues, refer to the user manual or customer support.
This answer is automatically generated
does the 94l use internal batteries?
No, the Roberts Stream 94L is mains powered but can use an optional battery pack for portability. It does not have internal batteries.
This answer is automatically generated
The radio is connected to router. Choose internet radio station but the menu to select stations does not come up what do I do
If the station selection menu does not appear on the Roberts Stream 94L radio when connected to the router, follow these steps:
1. Check WiFi Connection: Ensure the radio is connected to the correct WiFi network. Rotate the Tuning control to see available SSIDs and select the correct one.
2. Manual Network Configuration: If your network SSID is hidden, select '[Manual config]' and enter the network details manually.
3. Verify Internet Connection: Ensure the router has an active internet connection. Restart the router if needed.
4. Rescan for Stations: Try rescanning for internet radio stations by accessing the 'Station List' from the menu.
5. Check Troubleshooting Section: The issue may be covered in the 'Troubleshooting' section on page 54 of the manual.
6. Restart the Radio: Turn the radio off and on again to refresh the connection.
If the issue persists, consider resetting the radio to factory settings and setting up the connection again.
This answer is automatically generated
Hi, I have the Roberts Radio 94L and would like to use it in my outside - is it possible to buy a battery or accumulator (rechargeable) to be independent from the mains??? If yes, can you recommend some products?
The radio is connected to router. Choose internet radio station but the menu to select stations does not come up
The station selection menu may not appear on the Roberts Stream 94L radio if the device is not properly connected to the internet. Possible reasons include:
1. Incorrect or Weak WiFi Connection – The radio may not be connected to the correct wireless network or may have a weak signal.
2. SSID Not Broadcasted – If the router is set to hide the SSID, the radio may not detect the network automatically. In this case, manual configuration is required.
3. Incorrect Network Configuration – If the network settings were not set up correctly, the radio may not have internet access.
4. Temporary Connection Issue – Some Android devices may temporarily lose internet connectivity while setting up the radio, but this can be ignored.
Checking the network settings and ensuring a proper connection should resolve the issue.
This answer is automatically generated