Accessing Errors When A System Is Running Linux And The Console Is Not An Hmc; Resetting The System Attention Led; Resetting The Led When A System Is Attached To An Hmc; Resetting The Led When A System Is Running Aix And The Console Is Not An Hmc - IBM P 615 series Service Manual

Accessing Errors when a System is Running Linux and the Console is
Not an HMC
If the system attention LED comes on and the system is running Linux and is not attached to an HMC, do
one of the following:
v If you performed "Step 1321-43" on page 92 in "MAP 1321: Quick Entry MAP for Systems with Service
Focal Point" on page 80, return to "Step 1321-43" on page 92 to process any other symptoms.
v If you have not performed any of the steps in "MAP 1321: Quick Entry MAP for Systems with Service
Focal Point" on page 80, go to step "Step 1321-1" on page 80 and perform the procedures in the MAP.

Resetting the System Attention LED

Choose one of the following procedures to reset your attention LED.

Resetting the LED when a System is Attached To an HMC

To reset the system attention LED on HMC-attached systems, do the following:
1. On the HMC graphical interface, click Service Applications.
2. Double-click Service Focal Point.
3. In the Contents area of the screen, select Hardware Service Functions. The LED Management
window opens.
4. In the LED Management window, select one or more managed systems from the table.
5. Select Deactivate LED. The associated system attention LED is turned off.
For more information about the virtual operator panel on the HMC, see the Hardware Management
Console for pSeries Installation and Operations Guide .
Resetting the LED when a System is Running AIX and the Console is
not an HMC
As a user with root authority, type diag on the AIX command line, and do the following:
1. Select Task Selection.
2. On the Task Selection Menu, select Identify and Attention Indicators.
3. When the list of LEDs displays, use the cursor to highlight Set System Attention Indicator to
Normal.
4. Press Enter, and then press F7 to commit. This action turns off the LED.
If the system is powered off, access the service processor menus. From the service processor main menu,
do the following:
1. Select System Information Menu.
2. Select LED Control Menu.
3. Select Clear System Attention Indicator. This action turns off the LED.
50 EserverpSeries 615 Service Guide