Table of Contents
Advertisement
Table 9. Common Firmware Error Codes (continued)
Error Code Description
B1xx 4695 System power control network to service
processor interface failure
B1xx 4696 System firmware interface failure
B1xx 4698 Firmware problem
B1xx 4699 Service processor firmware error or informational
message.
B1xx 469A System firmware interface
B1xx 469B Firmware to I/O interface
B1xx 469C Firmware to I/O interface
B1xx 469E Service processor firmware failure
B1xx 469F Service processor failure
B1xx 8FF0 Informational message
B1FD 0013 A firmware update has failed because the
update image is invalid. The update was stopped
before any changes were made to the currently
installed firmware.
B1FD 0015 Too many firmware update diskettes inserted (or
wrong or faulty update image)
B1FD 0016 Diskette read error
208
EserverpSeries 615 Service Guide
Action/
Possible Failing FRU
1. Check for system firmware updates.
2. Service processor
Location: U0.1-P1-X1
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
See B1xx 4699 in "Error Code B1xx 4699" on
page 209.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. CEC backplane
Location: U0.1-P1
1. Check for system firmware updates.
2. CEC backplane
Location: U0.1-P1
1. Check for system firmware updates.
2. Go to "MAP 1540: Problem Isolation
Procedures" on page 110
3. CEC backplane
Location: U0.1-P1
1. Check for system firmware updates.
2. Go to "MAP 1540: Problem Isolation
Procedures" on page 110
3. CEC backplane
Location: U0.1-P1
See B1xx 8FF0 in "Error Code B1xx 8FF0" on
page 212.
Reset the service processor (by activating the
pinhole reset switch or by disconnecting, then
reconnecting power). Install a valid firmware
update image for the specific system type and
model.
1. Ensure the firmware update image is correct
for the specific system type and model.
2. Replace the update diskettes with a new set
of firmware update diskettes.
1. The firmware diskette may be faulty. Try
another diskette.
2. Replace the diskette drive.
3. Replace the CEC backplane
Location: U0.1-P1
Advertisement
Table of Contents
