Table of Contents
Advertisement
Step 1321-14
At the HMC console, open Service Focal Point (SFP) and examine the service action event log for any
closed service action events. For SFP operating instructions, refer to "Service Focal Point" on page 43.
Step 1321-15
Are there any service action events that are closed?
No
Go to the table in "Entry MAP" on page 53.
Yes
Go to "Step 1321-16."
Step 1321-16
Examine the details of the ten most-recently closed service action events.
Are there any error codes or symptoms in the ten latest closed service action events that are the
same as the error code or symptom recorded in "Step 1321-1" on page 80?
No
Go to the table in "Entry MAP" on page 53.
Yes
Go to "Step 1321-17."
Step 1321-17
Examine the FRUs of the same error codes or symptoms.
Are there any FRUs in the same error codes or symptoms of the closed service action events left
to be replaced?
No
Go to the table in "Entry MAP" on page 53.
Yes
Replace the next FRU of same error codes or symptoms of the closed service action events. Go
to "MAP 0410: Repair Checkout" in RS/6000 Eserver pSeries Diagnostic Information for Multiple
Bus Systems.
Step 1321-18
From the list of serviceable events with error code(s) of the form #xxxxxx, examine the details of each
serviceable event to display the description field of the error code(s) of the form #xxxxxx.
Step 1321-19
Double-click on the description field to view the complete text.
Step 1321-20
Perform any actions that may be listed in the descriptions of all error codes of the form #xxxxxx before
proceeding.
Step 1321-21
Did you find a problem?
No
Make a note of the eight character error code number in the bottom of the description field. Use
this error code when you are directed to the "Entry MAP" on page 53 later in this MAP. Go to
"Step 1321-7" on page 81.
Go to "MAP 0410: Repair Checkout" in RS/6000 Eserver pSeries Diagnostic Information for
Yes
Multiple Bus Systems.
82
EserverpSeries 615 Service Guide
Advertisement
Table of Contents
