Table of Contents
Advertisement
Table 5. Firmware Error Codes. (continued)
Error Code Description
2B20 8880 Unrecoverable internal hardware error
2B20 8881 Software error
2B20 8882 Software error
2B20 8883 Software error
2B20 8884 Unrecoverable processor subsystem error
2B20 8885 Unrecoverable internal hardware error
2B20 8888 Operating system termination request received
2B2x 00EE Description: An exception error has been reported on a global processor
Action: The type of interrupt that caused the exception is specified by the x as follows:
0:
1:
2.
3.
4.
5.
6.
7.
8.
1. Check for system firmware updates. Apply if available.
2. Call service support.
190
EserverpSeries 615 Service Guide
Unknown interrupt
System reset interrupt (SRI)
Machine check interrupt (MCI)
Data storage interrupt (DSI)
Instruction storage interrupt (ISI)
External interrupt (EXI)
Alignment interrupt (ALI)
Program interrupt (SRI)
Floating unavailable interrupt (FUI)
Action/
Possible Failing FRU
If Linux is the only operating system on the
failing system, call service support.
If AIX is available, and the system is powered
down, replace the FRU indicated by the service
processor error log entry. If AIX is available and
the system has been rebooted, run online AIX
diagnostics and look for an AIX error log entry in
which the description says cache or cache
controller error. Replace the FRUs listed with
this entry.
Call service support.
Call service support.
Call service support.
If Linux is the only operating system on the
failing system, call service support.
If AIX is available, and the system is powered
down, replace the FRU indicated by the service
processor error log entry. If AIX is available and
the system has been rebooted, run online AIX
diagnostics and look for an AIX error log entry in
which the description says cache or cache
controller error. Replace the FRUs listed with
this entry.
If Linux is the only operating system on the
failing system, call service support.
If AIX is available, run online AIX diagnostics
and look for an AIX error log entry in which the
description says I/O bus time-out, access, or
other error, or I/O bridge/device internal error.
Replace the FRUs listed with this entry.
Informational message.
Advertisement
Table of Contents
