IBM P 615 series Service Manual page 183

Checkpoint or What You Should Do
Error Code
1xxx xxxx System Power Control Network (SPCN) Error Codes
1. There may be additional error codes and information in the service processor error log. The
system must be powered off to examine the contents of the service processor error log.
a. Is the system still powered on?
NO
Yes
b. Can the system be powered off?
NO
YES
2. Confirm that this is the first error code that caused the failure as described in "Confirming Initial
Error Code" on page xxx.
3. Did you come to this step from step 2?
NO
YES
2xxx xxxx Firmware Error Codes
Go to "Firmware Error Codes" on page 170 and follow the instructions in the Firmware Error Code
table.
Go to step 2 below.
Ask the customer if the system can be powered off, then go to substep B.
Go to step 3 below.
Power off the system, then go to step 2 below.
Go to "SPCN Error Codes" on page 167 with the error codes you already have and
follow the instructions in the SPCN error code table.
Go to "SPCN Error Codes" on page 167 with the error code(s) from step two and
follow the instructions in the SPCN error code table.
Chapter 5. Error Code to FRU Index
163