Table of Contents
Advertisement
When a device type is selected, such as item 1, a Select Task menu will be displayed. The following is an
example of that menu for a hard disk.
Select Task
SCSI 18 GB Harddisk (loc=U0.1-P1/Z1-A3,0)
1. Information
2. Set Boot Sequence: Configure as 1st Boot Device
--------------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
Selecting Information will display a menu similar to the following for a hard disk.
Device Information
/pci@3fffdf0a000/pci@2,4/scsi@1/sd@8,0
: (Integrated)
DEVICE
: SCSI 18200 MB Harddisk ( loc=U0.1-P2/Z1-A8,0)
NAME
: sd
DEVICE-TYPE
: block
-------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen
-------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
The Set Boot Sequence option allows you to set the location of the device in the boot list.
X = eXit System Management Services
(Bootable)
X = eXit System Management Services
Chapter 8. Using System Management Services
277
Advertisement
Table of Contents
