Table of Contents
Advertisement
The INFO display will show one of the following:
ENGLISH, ESPANOL (Spanish), FRANCAIS (French) or NORSK
(Norwegian)
The language can now be selected and stored by pressing either
INCREASE or DECREASE. The INFO display will fall back to
HELMSMAN approx. 1 minute after the last operation of
INCREASE/ DECREASE, or immediately by pressing HELMSMAN.
HELMSMAN
This is the "stand-by" mode for the autopilot. When this mode is
selected, the autopilot is passive and manual rudder operation, either
by steering wheel or Non Follow Up (NFU) levers, is made.
The Heading Display will show the actual course with resolution of
one tenth of a degree, operating as a heading repeater. The Bargraph
Display will show one single vertical line, indicating zero heading
error.
AUTOPILOT
When clear of obstacles and in open waters, steer the vessel on course
and press the AUTOPILOT button.
The display will now show:
and the autopilot will automatically keep the vessel on course.
INCREASE- and DECREASE-buttons
These buttons are used to alter various settings. Each time one button
is pressed, the value shown on the information display, will increase
or decrease by one unit. The value is also shown as a graphical bar. If
the button is kept pressed for more than two seconds, the value will
automatically count up or down until the button is released.
ILLUM
The ILLUM button is used to adjust the illumination of buttons and
displays. .
20169223D
• Press INFO and keep it pressed.
• Press WEATHER
• Release WEATHER
• Release INFO.
* * * * * * *
AUTOPILOT
Operation
2-5
Advertisement
Table of Contents
