Ap9 Mk3 Dual Station - Simrad Robertson AP9 Mk3 Instruction Manual

Robertson AP9 MK3 Autopilot

AP9 MK3 Dual Station

Transfer of command from one unit to the other unit is made by
pressing the HELMSMAN button on the respective control unit.
Change of steering mode is made either on the control unit mode
buttons or by a separate mode selector.
Mode control function may also be included in an NFU lever (S9
connected for mode control, see mode selection).
All parameters can be readjusted from both units.
Compass selection and selection of NAV-mode (XTE-CTS-PRIORITY-
Note !
ECDIS) can only be made from the main station.
Additional equipment can be connected as for the Main unit.
The following description of operation for the optional equipment
also applies for the dual station configuration, when installed.
F200-40 AP9 Mk3 REMOTE
F200
COURSE
PORT MODE STBD
F200-40
F200
COURSE
PORT MODE STBD
2-20
MODE SELECTOR
MODE SELECTOR
AP9 Mk3 MAIN
FU91
S9
S9 FU91
20169223D