TP-Link TL-SG2424 User Manual page 59

Choose the menu Switching→LAG→LACP Config to load the following page.
The following entries are displayed on this screen
Global Config

System Priority:
LACP Config

Port Select:
Select:
Port:
Admin Key:
Figure 5-10 LACP Config
:
Specify the system priority for the switch. The system priority and
MAC address constitute the system identification (ID). A lower system
priority value indicates a higher system priority. When exchanging
information between systems, the system with higher priority
determines which link aggregation a link belongs to, and the system
with lower priority adds the proper links to the link aggregation
according to the selection of its partner.
Click the Select button to quick-select the corresponding port based
on the port number you entered.
Select the desired port for LACP configuration. It is multi-optional.
Displays the port number.
Specify an Admin Key for the port. The member ports in a dynamic
aggregation group must have the same Admin Key.
51