Port Config - TP-Link TL-SG2424 User Manual

Member Port Time:
Leave Time:
Router Port:
Note:
The settings here will be invalid when multicast VLAN is enabled
Configuration procedure:
Step Operation
1 Enable IGMP
function
2 Configure the
parameters for VLANs

8.1.3 Port Config

On this page you can configure the IGMP feature for ports of the switch.
When the switch receives IGMP report message, it examines the multicast filtering IP ID
configured on the access port to determine if the port can join the multicast group. If the multicast
IP is not filtered, the switch will add the port to the forward port list of the multicast group.
Otherwise, the switch will drop the IGMP report message. In that way, you can control the
multicast groups that users can access.
Choose the menu Multicast →IGMP Snooping →Port Config to load the following page.
Displays the member port time of the VLAN.
Displays the leave time of the VLAN.
Displays the router port of the VLAN.
Description
Snooping Required. Enable IGMP Snooping globally on the switch
and for
Snooping→Snooping Config and Port Config page.
multicast Optional. Configure the multicast parameters for VLANs on
Multicast→IGMP Snooping→VLAN Config page.
If a VLAN has no multicast parameters configuration, it
indicates the IGMP Snooping is not enabled in the VLAN,
thus the multicast data in the VLAN will be broadcasted.
Figure 8-7 Port Config
the port
99
on Multicast→IGMP