Vlan Config - TP-Link TL-SG2424 User Manual

Last Listener Query
Count:
Multicast VLAN:
Multicast VLAN ID:
Note:
1. When Unknown Multicast Filter is configured, the Unknown Multicast function in IGMP
Snooping is also configured at the same time.
2. Configurations of the Router Port Aging Time and Member Port Aging Time in
Config override their global configurations here.
3. Before creating a Multicast VLAN, you should enable the MLD snooping function in this VLAN
in 8.2.2 VLAN Config.
Configuration Procedure of Multicast VLAN:
Step Operation
1 Create VLAN.
2 Enable MLD
globally.
3 Enable MLD Snooping in the
VLAN.
4 Enable the Multicast VLAN.

8.2.2 VLAN Config

On this page you can configure MLD Snooping function with each single VLAN. You need to
create VLAN if you want to enable MLD Snooping function in this VLAN.
Enter the Last Listener Query numbers. When the multicast
group has no more member ports, it will send this numbers of
Specific Query Message to check whether there is another
listener.
Enable or disable multicast VLAN function. When multicast
VLAN is enabled, all multicast data will forward in this VLAN if
this port belongs to the VLAN.
Enter the multicast VLAN ID.
Description
Required. On the VLAN →802.1Q VLAN →VLAN Config
page, click the Create button to create a VLAN. Enter the
VLAN ID and the description for the VLAN. Meanwhile,
specify its member ports.
Snooping Required. On the Multicast →MLD Snooping →Global
Config page, enable the MLD Snooping function globally.
Required. On the Multicast →MLD Snooping →VLAN
Config page, specify the VLAN ID as the VLAN created in
step 1.
Required. On the Multicast →MLD Snooping →Global
Config page, enable the Multicast VLAN function and
specify the Multicast VLAN ID as the VLAN specified in
Step 1.
110
8.2.2 VLAN