TP-Link TL-SG2424 User Manual page 167

The following entries are displayed on this screen:
User Config

User Name:
User Type:
Group Name:
Security Model:
Security Level:
Auth Mode:
Auth Password:
Privacy Mode:
Privacy Password:
User Table

Select:
User Name:
User Type:
Group Name:
Security Model:
Security Level:
Auth Mode:
Privacy Mode:
Operation:
Note:
The SNMP User and its Group should have the same Security Model and Security Level.
Enter the User Name here.
Select the type for the User.

Local User: Indicates that the user is connected to a
local SNMP engine.

Remote User: Indicates that the user is connected to a
remote SNMP engine.
Select the Group Name of the User. The User is classified to
the corresponding Group according to its Group Name,
Security Model and Security Level.
Select the Security Model for the User.
Select the Security Level for the SNMP v3 User.
Select the Authentication Mode for the SNMP v3 User.

None: No authentication method is used.

MD5: The port
HMAC-MD5 algorithm.

SHA: The port authentication is performed via SHA
(Secure Hash Algorithm). This authentication mode has
a higher security than MD5 mode.
Enter the password for authentication.
Select the Privacy Mode for the SNMP v3 User.

None: No privacy method is used.

DES: DES encryption method is used.
Enter the Privacy Password.
Select the desired entry to delete the corresponding User. It is
multi-optional.
Displays the name of the User.
Displays the User Type.
Displays the Group Name of the User.
Displays the Security Model of the User.
Displays the Security Level of the User.
Displays the Authentication Mode of the User.
Displays the Privacy Mode of the User.
Click the Edit button to modify the Group of the User and click
the Modify button to apply.
159
authentication is performed via