Poe Profile - TP-Link TL-SG2424 User Manual

Power Limit
(0.1w-30w):
Time Range:

PoE Profile:

Power (W):
Current (mA):
Voltage (V):
PD Class:
Power Status:
11.1.2 PoE Profile
PoE (Power over Ethernet) Profile is a short cut for the configuration of the PoE port. You can
create some profiles to be applied to the ports. In a profile, the PoE status, PoE priority and Power
limit are configured.
Choose the menu PoE→PoE Config→Profile Profile to load the following page.
The following items are displayed on this screen:
Create PoE Profile

Profile Name:
PoE Status:
PoE Priority:
Defines the max power the corresponding port can supply. Class1
represents 4w, Class2 represents 7w, Class3 represents 15.4w
and Class4 represents 30w.
Select the time range for the PoE port to supply power. If No limit
is selected, the PoE port will supply power all the time.
Select the profile you want to apply to the selected port. If a PoE
Profile is selected, the three attributes including PoE Status, PoE
Priority and Power Limit are not available.
Displays the port's real time power supply.
Displays the port's real time current.
Displays the port's real time voltage.
Displays the class the linked PD (Powered Device) belongs to.
Displays the port's real time power status.
Figure 11-2 Profile Config
Enter the name of the profile.
Select to the enable/disable PoE feature for the corresponding
port. If set enable, the port may supply power to the linked PD
(Power Device).
The priority levels include High, Middle and Low in descending
order. When the supply power exceeds the system power limit,
the PD linked to the port with lower priority will be disconnected.
149