Instance Config - TP-Link TL-SG2424 User Manual

Choose the menu Spanning Tree→MSTP Instance→Region Config to load the following page.
The following entries are displayed on this screen:
Region Config

Region Name:
Revision:

7.3.2 Instance Config

Instance Configuration, a property of MST region, is used to describe the VLAN to Instance
mapping configuration. You can assign VLAN to different instances appropriate to your needs.
Every instance is a VLAN group independent of other instances and CIST.
Choose the menu Spanning Tree→MSTP Instance→Instance Config to load the following page.
Figure 7-7 Region Config
Create a name for MST region identification using up to 32 characters.
Enter the revision from 0 to 65535 for MST region identification.
Figure 7-8 Instance Config
80