Local Management - TP-Link TL-WR840N User Manual

Chapter 4
• Enable ICMP-FLOOD Attack Filtering
function.
• ICMP-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current ICMP-FLOOD packets is beyond
the set value, the router will startup the blocking function immediately.
• Enable UDP-FLOOD Filtering
• UDP-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current UPD-FLOOD packets is beyond
the set value, the router will startup the blocking function immediately.
• Enable TCP-SYN-FLOOD Attack Filtering
function.
• TCP-SYN-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current TCP-SYN-FLOOD packets is
beyond the set value, the router will startup the blocking function immediately.
• Ignore Ping Packet From WAN Port
ping packet from the internet cannot access the router.
• Forbid Ping Packet From LAN Port
ping packet from LAN cannot access the router. This function can be used to defend
against some viruses.
3. Click Save.
4. Click Blocked DoS Host List
4 8 3

Local Management

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Security > Local
accessing the router.
For example, if you want to allow PCs with specific MAC addresses to access the router's
web management page locally from inside the network, please follow the instructions
below:
- Tick the checkbox to enable or disable this
- Tick the checkbox to enable this function.
- The default value is 500. Enter a value
-Tick the checkbox to enable or disable this
- The default setting is disabled. If enabled, the
- The default setting is disabled. If enabled, the
to display the DoS host table by blocking.
Management, and you can block computers on the LAN from
Configure the Router in Wireless Router Mode
- The default value is 50. Enter a value
- The default value is 50. Enter a value
45