TP-Link TL-SG2424 User Manual page 34

Link-local Address Config

Config Mode:
Link-local Address:
Status:
Global Address Autoconfig via RA Message

Enable global
address auto
configuration via RA
message:
Global Address Autoconfig via DHCPv6 Server

Enable Global
Address Autoconfig
via DHCPv6 Server:
Add a global address manually

Address Format:
Global Address:
Global address Table

Select:
Global Address:
Prefix Length:
Select the link-local address configuration mode.
Manual: When this option is selected, you should assign a

link-local address manually.
Auto: When this option is selected, the switch will generate a

link-local address automatically.
Enter a link-local address.
Displays the status of the link-local address.
Normal: Indicates that the link-local address is normal.

Try: Indicates that the link-local address may be newly

configured.
Repeat: Indicates that the link-local address is duplicate. It is

illegal to access the switch using the IPv6 address(including
link-local and global address).
When this option is enabled, the switch automatically configures a
global address and other information according to the address
prefix and other configuration parameters from the received
RA(Router Advertisement) message.
When this option is enabled, the system will try to obtain the
global address from the DHCPv6 Server.
You can select the global address format according to your
requirements.
EUI-64: Indicates that you only need to specify an address

prefix, and then the system will create a global address
automatically.
Not EUI-64: Indicates that you have to specify an intact global

address.
When selecting the mode of EUI-64, please input the address
prefix here, otherwise, please input an intact IPv6 address here.
Select the desired entry to delete or modify the corresponding
global address.
Modify the global address.
Modify the prefix length of the global address.
26