TP-Link TL-SG2424 User Manual page 22

When the cursor moves on the port, the detailed information of the port will be displayed.
Port Info

Port:
Type:
Rate:
Status:
Click a port to display the bandwidth utilization on this port. The actual rate divided by theoretical
maximum rate is the bandwidth utilization. The following figure displays the bandwidth utilization
monitored every four seconds. Monitoring the bandwidth utilization on each port facilitates you to
monitor the network traffic and analyze the network abnormities.
Bandwidth Utilization

Rx:
Tx:
Indicates the SFP port is at the speed of 1000Mbps.
Figure 4-2 Port Information
Displays the port number of the switch.
Displays the type of the port.
Displays the maximum transmission rate of the port.
Displays the connection status of the port.
Figure 4-3 Bandwidth Utilization
Select Rx to display the bandwidth utilization of receiving packets
on this port.
Select Tx to display the bandwidth utilization of sending packets
on this port.
14