A device will send an IPv6 ICMP redirect message when the following conditions are satisfied:
The receiving interface is the forwarding interface.
The selected route itself is not created or modified by an IPv6 ICMP redirect message.
The selected route is not the default route.
The forwarded IPv6 packet does not contain any routing header.
You can configure the system's administrative IPv6 address on this page.
Choose the menu System →System Info →System IPv6 to load the following page.
The following entries are displayed on this screen:
Global Config
IPv6:
Figure 4-10 System IPv6
Enable/Disable IPv6 function globally on the switch.
25