Lag Table - TP-Link TL-SG2424 User Manual

Tips:
1. Calculate the bandwidth for a LAG: If a LAG consists of the four ports in the speed of
1000Mbps Full Duplex, the whole bandwidth of the LAG is up to 8000Mbps (2000Mbps * 4)
because the bandwidth of each member port is 2000Mbps counting the up-linked speed of
1000Mbps and the down-linked speed of 1000Mbps.
2. The traffic load of the LAG will be balanced among the ports according to the Aggregate
Arithmetic. If the connections of one or several ports are broken, the traffic of these ports will
be transmitted on the normal ports, so as to guarantee the connection reliability.
The LAG function is implemented on the LAG Table, Static LAG and LACP Config configuration
pages.

5.2.1 LAG Table

On this page, you can view the information of the current LAG of the switch.
Choose the menu Switching→LAG→LAG Table to load the following page.
The following entries are displayed on this screen:
Global Config

Hash Algorithm:
LAG Table

Select:
Group Number:
Description:
Member:
Figure 5-7 LAG Table
Select the applied scope of Aggregate Arithmetic, which
results in choosing a port to transfer the packets.
 SRC MAC + DST MAC: When this option is selected, the
Aggregate Arithmetic will apply to the source and destination
MAC addresses of the packets.
 SRC IP + DST IP: When this option is selected, the
Aggregate Arithmetic will apply to the source and destination
IP addresses of the packets.
Select the desired LAG. It is multi-optional.
Displays the LAG number here.
Displays the description of LAG.
Displays the LAG member.
48