Labels; Note For Power Connections - Shure Microflex Complete MXC Series User Manual

17. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
18. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer or having the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
19. Safety Check - Upon completion of any service or repairs to this apparatus, ask the service technician to perform safe-
ty checks to determine that the apparatus is in proper operating condition.
20. Overloading - Do not overload outlets and extension cords as this can result in a risk of fire or electric shock.
21. Power Sources - This apparatus should be operated only from the type of power source indicated on the marking la-
bel. If you are not sure of the type of power supply you plan to use, consult your appliance dealer or local power com-
pany. For apparatuses intended to operate from battery power, or other sources, refer to the operating instructions.
22. Power Lines - An outdoor system should not be located in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or circuits. When installing an outdoor system, extreme care
should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.
23. Object and Liquid Entry - Never push objects of any kind into this apparatus through openings as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the apparatus. Should any liquid or solid object fall into the cabinet, unplug the unit and
have it checked by qualified personnel before operating it further.

Labels

"Lightning Flash Symbol" with the lightning flash with arrowhead symbol within an equilateral triangle, is
intended to alert the user to the presence of un-insulated "dangerous voltage" within the product enclo-
sure that may be of sufficient magnitude to constitute a risk of shock to persons.
"Exclamation Point Symbol" with the exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance (servicing) instructions in the literature
accompanying the product.

Note for Power Connections

Check that the voltage of your local power supply is within the operating voltage of the unit. If a voltage conversion is required,
consult your DIS dealer or qualified personnel.
Set the Power switch to 'Off' if it is not used for several days.
Important: The equipment must be connected to earth (ground)
The wires in the main lead supplied with the equipment are colored in accordance with the following codes:
• Green-and-yellow Earth (Ground)
• Blue Neutral
• Brown Live
• The green-and-yellow wire must be connected to the terminal in the plug marked with the letter E or with the safety earth
symbol or marked with green-and-yellow color.
• The blue wire must be connected to the terminal marked with the letter N or marked with black color.
• The brown wire must be connected to the terminal marked with the letter L or marked with red color.
• For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.
Shure Incorporated
5/75