Programming Channel Text Tags; Setting Ctcss/Dcs For A Channel - Uniden UBC125XLT Owner's Manual

PROGRAMMING CHANNEL TEXT TAGS

You can customize your channels by programming text tags
(up to 16 characters in length) for easier channel frequency
identifi cation. The default tag is the bank number followed by
the channel number in the bank.
1. To select a channel, press Hold and then enter the channel
number.
Press Pgm/E to enter the Channel menu. (You can also
2.
press Hold and scroll to the channel; press Func then
Pgm/E.)
Scroll to select Edit Tag and press Pgm/E.
3.
4. Turn SCROLL CONTROL to choose the characters, pressing
> or < to move the cursor to the right or left. If you make a
mistake, press . CLR to clear the last character. Press . CLR
twice to clear all characters. To cancel and exit, press L/O.
Press Pgm/E to save the tag and return to the Channel
5.
menu.

SETTING CTCSS/DCS FOR A CHANNEL

You can store a CTCSS tone or DCS code, set the scanner to
search for tones/codes, have the scanner open squelch on any
tone/code, or have the squelch only open if no CTCSS/DCS is
detected for any channel. (Default = Off )
1. To select a channel, press Hold and then enter the channel
number.
Press Pgm/E to enter the Channel menu. (You can also press
2.
HOLD and scroll to the channel; press Func then Pgm/E.)
36