Gps Advanced Operations; Modifying A Waypoint With A Custom Icon And Name - Uniden MYSTIC Owner's Manual

Mystic OM.book Page 96 Wednesday, October 22, 2003 8:59 PM

GPS Advanced Operations

Modifying a Waypoint with a Custom Icon and Name

When you mark a Waypoint, you just want to save your position quickly.
However, it will be difficult to figure out later which waypoint this is from a
list of waypoints named WPT001, WPT002, etc. For that reason, you may
want to change the default name to one of your choosing. You can also
select a different icon that will help you find the waypoint when you are
using the map screen.
To do this, press and hold [GOTO] for 2
seconds.Use to move the highlight to
the Icon field and press [ENTER].
The Icon Select window is displayed. Use the
to move from one icon to another.
Note the name of the icon displayed at the top.
As a reference tool, all of the icons and their
names are listed at the back of this Operating
Guide (see page 117.) When you have
highlighted the icon you want to use, press
[ENTER].
96