Operation
Scanning
The UHF CB Radio has a scanning feature
that allows you to search for active channels
automatically.
Furthermore, the UHF CB Radio provides two
memory groups to scan from; Open Scan group
(OS) and Group Scan group (GS), to give you
flexibility. Channels can be added or removed
from the memory groups, see p.20. Channels in
memory are indicated by the M icon.
Press [SCAN] and scanning of the current
memory group will start. SC flashes during scan.
The scan direction can be changed at any time by pressing
Open Scan (OS) Mode
Allows continuous scanning of all channels. By default, all channels are
stored in the Open Scan memory. During Scan, if an active channel is
found, scanning will stop on that channel. If the received signal ceases,
the unit will wait 3 seconds for the signal to return, otherwise scanning
resumes.
After transmission in scan mode, the unit will wait 20 seconds for the
signal to return, otherwise scanning resumes.
To skip the active channel, press
To activate or deactivate SCAN, press [SCAN].
If SCAN is deactivated while on an active channel, the UHF
CB Radio will stay on that active channel. If no channels are
active, the UHF CB Radio will reinstate the starting channel.
NOTE
UNIDEN X76
/
momentarily.
18
/
.
UHF CB Transceiver