Motorola AP-7131 Product Reference Manual page 410

8-82 AP-7131 Access Point Product Reference Guide
AP7131>admin(network.wireless.security)>create
Description:
Defines the parameter of access point security policies.
Syntax:
create
show
set sec-name
auth
kerb
eap
<name>
<authtype>
realm <name>
server <sidx>
port <sidx>
server <sidx>
port <sidx>
Defines the parameters of a security policy.
Displays new or existing security policy
parameters.
Sets the name of the security policy.
Sets the authentication type for WLAN <idx> to
<type> (none, eap, or kerberos).
Note: Kerberos parameters are only in affect if
"kerberos" is specified for the authentication
method (set auth <type>).
Sets the Kerberos realm.
<ip> Sets the Kerberos server <sidx> (1-primary, 2-
backup, or 3-remote) to KDC IP address.
<port> Sets the Kerberos port to <port> (KDC port) for
server <ksidx> (1-primary, 2-backup, or 3-remote).
Note: EAP parameters are only in affect if "eap"
is specified for the authentication method (set
auth <type>).
<ip> Sets the radius server (1-primary or as 2-
secondary) IP address <ip>.
<port> Sets the radius server <sidx> (1-primary or 2-
secondary) <port> (1-65535).