Motorola AP-7131 Product Reference Manual page 171

CAUTION A WLAN cannot be enabled for both mesh and hotspot support at the
!
NOTE If 802.11a/n is selected as the radio used for the WLAN, the WLAN
cannot use a Kerberos supported security policy.
4. Configure the Security
WLAN.
NOTE A WLAN configured to support Mesh should not have a Kerberos or
802.1x EAP security policy defined for it, as these two authentication
schemes are not supported within a Mesh network.
Security Policy
MU Access Control
Kerberos User Name
Kerberos Password
5. Configure the Advanced
beacon transmissions, broadcast ESSID acceptance and Quality of Service (QoS) policies.
same time. Only one of these two options can be enabled at one time,
as the GUI and CLI will prevent both from being enabled.
field as required to set the data protection requirements for the
Use the scroll down
scheme best suited for the new or revised WLAN. Click the
button to jump to the New Security Policy screen where a new
policy can be created to suit the needs of the WLAN. For more
information, see Configuring WLAN Security Policies on page 5-34
Select an ACL policy suiting the WLAN's MU introperability
requirements from the drop-down menu. If the existing ACL
policies do not satisfy the requirements of the WLAN, a new ACL
policy can be created by pressing the
information, see Configuring a WLAN Access Control List (ACL) on
page 5-36.
Displays the read-only Kerboros User Name used to associate the
wireless client. This value is the ESSID of the access point.
Enter a Kerberos password if
security scheme from within the
is grayed out if Kerberos has not been selected for the WLAN. For
information on configuring Kerberos, see
Authentication on page
field as required to set MU interoperability permissions, secure
Security Policies menu to select the security
Create
Kerberos has been selected as the
Security Policies
Configuring Kerberos
6-8.
Network Management
Create
.
button. For more
field. The field
5-33