Motorola AP-7131 Product Reference Manual page 490

8-162 AP-7131 Access Point Product Reference Guide
AP7131>admin(system.aap-setup)>set
Description:
Sets access point's Adaptive AP configuration.
Syntax:
set auto-discovery
interface
ipadr
name
port
passphrase
tunnel-to-switch
ac-keepalive
admin(system.aap-setup)>set auto-discovery enable
admin(system.aap-setup)>set interface wan
admin(system.aap-setup)>set ipadr 192.235.111.10
admin(system.aap-setup)>set port 1812
admin(system.aap-setup)>set passphrase mudskipper
For information on configuring adaptive AP using the applet (GUI), see
For an overview of adaptive AP functionality and its implications, see
Sets the switch auto-discovery mode (enable/disable).
Defines the tunnel interface (wan, lan1 or lan2).
Defines the switch IP address used.
Defines the switch name for DNS lookups (up to 127 characters).
Sets the port.
Defines the pass phrase or key for switch connection.
Enables/disables the tunnel between switch and access point.
Defines the keepalive interval.
Adaptive AP Setup on page
Adaptive AP on page 10-1.
4-8.