Power Injector Led Indicators - Motorola AP-7131 Product Reference Manual

Ensure the cable length from the Ethernet source (host) to the Power Injector and access
point does not exceed 100 meters (333 ft). The Power Injector does not have an On/Off
switch. Each Power Injector receives power as soon as AC power is applied.
3. Verify all cable connections are complete before supplying power to the access point.

2.6.1.3 Power Injector LED Indicators

The Power Injector demonstrates the following LED behavior under normal and/or problematic
operating conditions:
LED
Green (Steady)
Green (Blinking) Output voltage source is out of range.
For more information and device specifications for the AP-7131 Power Injector (Part No.
AP-PSBIAS-1P3-AFR), refer to the Power Injector Quick Install Guide (Part No. 72-109209-01)
available from the Motorola Web site.
AC (Main)
Power Injector is receiving power from an
AC outlet.
Hardware Installation
Port
Indicates a device is connected to the
Power Injector's outgoing Data & Power
cable.
The Power Injector is overloaded or has a
short circuit.
2-9