Viewing Radio Statistics - Motorola AP-7131 Product Reference Manual

7-20 AP-7131 Access Point Product Reference Guide
% NU
Retries
3. Click the
in order to begin new data collections.
Do not clear the radio stats if currently in an important data gathering activity or risk losing
all data calculations to that point.
For information on viewing radio statistics particular to the access point radio type displayed
within the AP Stats Summary screen, see
4. Click the

7.4.1 Viewing Radio Statistics

Refer to the Radio Stats
802.11a/n or 802.11b/g/n) displayed within the Radio Summary screen. There are four fields within
the screen. The Information
channel and power information. The
and errors received and transmitted. The Traffic field does not add retry information to the stats
displayed. Refer to the
information. Finally, the
access point radio either dropped or could not decrypt. The information within the 802.11a/n Radio
Statistics screen is view-only with no configurable data fields.
To view detailed radio statistics:
1. Select Status and Statistics
access point menu tree.
Displays the percentage of the total packets that are non-unicast.
Non-unicast packets include broadcast and multicast packets.
Displays the average number of retries per packet on each radio. A
high number could indicate network or hardware problems.
Clear All Radio Stats
Logout button to securely exit the Access Point applet.
screen to view detailed information for the access point radio (either
field displays device address and location information, as well as
Traffic
RF Status field for an average MU signal, noise and signal to noise ratio
Errors field displays retry information as well as data transmissions the
->
button to reset each of the data collection counters to zero
Viewing Radio Statistics on page
field displays statistics for cumulative packets, bytes,
Radio Stats -> Radio1(802.11b/g/n) Stats
7-20.
from the