Motorola AP-7131 Product Reference Manual page 190

5-52 AP-7131 Access Point Product Reference Guide
2. Enable the radio(s) using the
Refer to
802.11a/n or 802.11b/g/n radio. After the settings are applied within this Radio
Configuration screen, the
existing radio within a mesh network, these values update in real-time.
CAUTION If a radio is disabled, be careful not to accidentally configure a new
!
3. Select the
connections from other access points in client bridge mode. The base bridge is the acceptor
of mesh network data from those client bridges within the mesh network and never the
initiator.
Enable
RF Band of Operation
Radio Status
WLAN, expecting the radio to be operating when you have forgotten it
was disabled.
Base Bridge checkbox to allow the access point radio to accept client bridge
checkbox(es).
parameter to ensure you are enabling the correct
and MUs connected values update. If this is an